Skip to content
WoW Forever

Getting the Classic look in WoW Forever: models, HUD and interface art

Most of the Classic feel is two switches away: Standard Definition models and the Classic HUD layout. The original gryphon bar, frames and window art are another matter. The built-in Classic preset only sets preferences, so that part takes a community addon.

  • Published
  • Updated
  • Reading time6 min

Everything here is based on what Blizzard had shown or posted up to 9 Oct 2026. The game’s own options were read from the pre-release demo of 12 Sept, then updated with the development notes of 1 Oct and 8 Oct and the Skyborne post of 7 Oct. For the addon, version and features come from its author’s listing as it stood on 7 Oct.

The Classic look in short

Character models
Standard DefinitionSaved per account; asks for a UI reload
HUD layout
Classic (Preset)Edit Mode → Layout
Classic preset
4 starting choicesAll adjustable afterwards
Old interface art
ClassicUI ForeverCommunity addon, v0.20.5
Skyborne in SD
Early 2027HD models only until then

Menu labels as they appeared in the 12 Sept pre-release build; addon details from its listing on 7 Oct 2026.

Four steps to a Classic look

  1. Pick Classic on the preset screen

    If the game shows Choose Your Experience Preset, go with Classic. Nothing it sets is permanent; you can change each choice later.
  2. Set character models to SD

    Go to Game Menu → Options → System → Graphics → Character Models, choose Standard Definition, then accept the UI reload the game asks for.
  3. Apply the Classic HUD layout

    Open Game Menu → Edit Mode → Layout and switch it to Classic (Preset).
  4. Optional: install an addon for the old art

    ClassicUI Forever is a player-made addon whose listing names the Forever client. Its options decide which interface pieces it reskins.

Menu paths and preset names follow the 12 Sept pre-release build. Where your client uses different wording, go by the labels on your screen.

The Classic preset: four starting choices

The demo’s Choose Your Experience Preset screen has two options, Classic and Enhanced, and each fills in four settings for you. The same screen points out that they can be changed later, so going with Classic does not lock away any of the newer conveniences.

Starting values the Classic preset applies, from the 12 Sept build
OptionSet by Classic
Character models
Standard Definition
Quest points of interest and objective blobs
Off
One-bag
Off
Transmog
Off

The preset changes settings; it does not reskin anything. Original action bars, cast bars, nameplates and character windows do not come back with it. In a Blizzard forum thread (opens in a new tab), beta players say the same about the Classic layout in Edit Mode: frames move, but the Classic textures are missing. The demo shows exactly that.

SD versus HD character models

The switch lives at Game Menu → Options → System → Graphics → Character Models → Standard Definition. According to the tooltip shown in the demo, the choice applies to your whole account, and changing it while playing needs a UI reload. Only characters are affected; terrain, buildings and the rest of the world keep the current graphics.

The Skyborne exception

No SD Skyborne exist yet, so with Standard Definition on they still appear in HD. Blizzard’s 7 Oct Skyborne update (opens in a new tab) says SD models for Skyborne characters and for their Druid forms are in production, aimed at early 2027. Meanwhile the HD Druid forms are getting a rework, with more detailed fur and adjusted colors. Bear Form and Travel Form received the new textures in the 8 Oct build (opens in a new tab); Cat Form, Zephras Isle’s creatures and several mounts and pets were scheduled for a later build.

Preview both model sets at character creation

Flip between SD and HD before you confirm a new character. In a beta discussion on 23 Sept, players found that the options both versions share, face and hair among them, are kept when you switch, but a handful of HD-only options (eye color and eyebrows for some races, for example) need setting separately. That is player testing and could vary by race or build; either way, it does not mean building the character twice. The 1 Oct notes (opens in a new tab) added icons in character creation that update to match when Standard Definition is toggled.

SD is not a promise of Classic Era’s exact models or animations. What the demo shows is the option itself; nobody compared every race. Separately, Blizzard has announced (opens in a new tab) that HD character models get their Classic animations back, and that the environment is rendered differently.

Edit Mode and the Classic layout

Choose Classic (Preset) under Game Menu → Edit Mode → Layout. In the demo this moves your player frame up into the top-left corner and leaves the action bars where they were, along the bottom. Only the positions change: the frames and bars themselves are still drawn in Forever’s newer style.

Modern (Preset)Your own frame is drawn close to the middle of the screen.
Classic (Preset)Your frame jumps to the top-left corner, and the action bars remain at the bottom.

A rough sketch, not to scale, based on the 12 Sept 2026 pre-release demo. Either way, frames and bars are still drawn with Forever’s newer artwork.

The 8 Oct build (opens in a new tab) gave each UI type its own Edit Mode layout, so a keyboard setup and a gamepad setup no longer overwrite each other. Settings for the gamepad bar itself, such as the compact version, also moved into Edit Mode. Your old choices from the options menu did not come with them, so set them again there.

Bringing back the old art: ClassicUI Forever

For the original artwork you need ClassicUI Forever, an addon made by a player and published for the Forever client. Its author lists the parts it can bring back: unit frames, cast frames, nameplates, the minimap, bags, the spellbook, the quest log, the gryphon action bar and other windows. /fcui opens its options, where each part has its own on/off switch. On your first login it also offers an Edit Mode layout of its own, so you decide whether to keep the game’s layout or use the addon’s.

Version check, 7 Oct 2026

On the author’s listing, v0.20.5 (uploaded 6 Oct) covered both Retail and Forever. Before installing, confirm that Forever 1.60.1 appears in the file’s supported versions; seeing Retail as well is not a problem when Forever is listed. During the beta the addon moved fast, with six releases from 4 to 6 Oct, and the author describes it as a work in progress.

Turn the replacements on in /fcui one at a time. After each, open a bag, your spellbook and a vendor, the windows you will see most often. Should a game patch break a module, disable it and go back to the default interface for that part. The addon only replaces interface art; it does nothing to SD or HD models or to Forever’s world graphics. To check any addon against Forever, read the addons and API guide.

Where Forever will still look different

  • The world. SD models do not touch the scenery. Forever’s new lighting, rivers, mist, terrain and zone art remain, and Blizzard covers those environment changes separately (opens in a new tab). Ray Traced Shadows was taken out of the options on 1 Oct; Blizzard says it will come back in a future update after it is fixed.
  • Spell and button effects. Restored character animations do not mean every spell effect and proc flash looks as it did. ClassicUI Forever has an option for the cast animation on action buttons, but that is the addon’s feature, not the game’s, and it may not catch every effect.
  • What others see. HUD layouts and addons only change what is on your screen. Your model choice is an account preference and cannot put another player into SD. Blizzard also calls transmog opt-in.

However you set it up, Forever’s new content and class changes are part of the package. The beta guide covers what testers could try up to level 30.

Quick answers

Will the Classic preset give me the old frames and bars?

No. All it does is set four preferences. Windows, nameplates, frames and bars stay in Forever’s newer art unless you install an addon like ClassicUI Forever.

If I switch to SD, do other players see me in SD?

Only players who chose SD for themselves. The setting controls how models are drawn on your screen, it is saved to your account, and it has no effect on what anybody else sees.

Is there an SD version of the Skyborne?

Not yet. A Skyborne character is drawn in HD even when Standard Definition is on. Blizzard is aiming for SD Skyborne models, Druid forms included, in early 2027.

Why does changing the model setting trigger a reload?

In the demo, the tooltip on that setting warns that changing it in game requires a UI reload. The brief reload is normal, not a fault.

Where the facts come from

This page was not checked in the beta client itself, and the addon, every race and animation, and how a character looks to someone else were not tested. Menu wording, the addon’s behavior and the SD/HD model mapping may have changed since the beta, and none of it has been rechecked in the live game yet.
  1. OfficialBlizzard

    World of Warcraft: Forever What’s Next Panel Recap (opens in a new tab)

    The announced options, among them Classic animations restored on HD models, and the changes to the environment.

  2. OfficialBlizzard

    The World of Warcraft: Forever Beta Now Live (opens in a new tab)

    The beta opening on 17 Sept and the options listed with it.

  3. OfficialBlizzard forums

    WoW Forever Beta Development Notes (updated October 1) (opens in a new tab)

    SD icons in character creation, and Ray Traced Shadows taken out.

  4. OfficialBlizzard forums

    WoW Forever Beta Known Issues (October 1) (opens in a new tab)

    Known issues posted together with the 1 Oct notes.

  5. OfficialBlizzard forums

    WoW Forever Beta Development Notes (updated October 8) (opens in a new tab)

    Separate Edit Mode layouts for each UI type; gamepad bar settings moved into Edit Mode.

  6. OfficialBlizzard forums

    WoW Forever Beta Known Issues (October 8) (opens in a new tab)

    Fresh textures for Bear and Travel Form on Skyborne Druids.

  7. OfficialBlizzard

    World of Warcraft: Forever, the future of Skyborne visual updates (opens in a new tab)

    Rework of the HD Skyborne Druid forms; SD Skyborne models targeted for early 2027.

  8. CommunityVideo

    Pre-release demo recording, 12 Sept 2026

    Preset screen at 03:16:50, Graphics options at 03:28:40, and the Edit Mode layout from 03:22:24 to 03:22:50.

  9. CommunityBlizzard forums

    “Classic UI please”, Forever beta discussion (opens in a new tab)

    Players noting that the Classic layout keeps the newer textures.

  10. CommunityBeta players

    Beta character creation discussion, 23 Sept 2026

    Which appearance options are shared between SD and HD.

  11. CommunityAddon author

    ClassicUI Forever addon listing and changelog

    Version number, supported clients, replaced modules and fixes made during the beta.